The improvement of aseismic horizontal frame's thermal insulations

Описание

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: International Scientific Conference on Advanced in Civil Engineering Construction - The Formation of Living Environment (FORM); Moscow State Univ Civil Engn, Moscow, RUSSIA; Moscow State Univ Civil Engn, Moscow, RUSSIA

Год издания: 2018

Идентификатор DOI: 10.1088/1757-899X/365/4/042071

Ключевые слова: an energy efficiency of civil engineering, an insulation layer, Aseismic horizontal frame, floor slab level, heat losses, stationary heat temperature, temperature field, thermal bridge

Аннотация: Recommendations about elimination of the thermal insulation's defects are offered in this research. The recommendations are based on the thermal imaging inspection of residential buildings, which were built with aseismic demands. The designing construction solution of filler structures taking into account the increase of comfort inПоказать полностьюthe room is presented. In the proposed work the typical designs structures of the site supporting floor slab on a brick wall (width 770 mm). Aseismic horizontal frame is abutting to the floor slab on the same level. The insulation layer of 140 mm width made with expanded polystyrene sites on the whole height of the wall. This layer is braked aseismic horizontal frame on the floor slab level. The aseismic horizontal frame is covered by the expanded polystyrene of 20 mm width. The thermal bridge in the direction of the facade is very typical for this designing construction solution. The thermal bridge is in the mid-height of the floor slab near the insulation layer. The purpose of the research is to find a solution which will minimize or elimination thermal bridge with using additional insulation layer sites in the different level. Repeatability of thermal imaging inspection of designing construction solution and theoretical calculations in the software package ElCut are confirmed. The presentation is illustrated with examples of temperature fields for the different residential buildings. © Published under licence by IOP Publishing Ltd.

Ссылки на полный текст

Издание

Журнал: Journal of Physics: Conference Series

Выпуск журнала: Vol. 365, Is. 4

Номера страниц: 42071

ISSN журнала: 17426588

Издатель: Institute of Physics Publishing

Персоны

  • Khalimov Oleg (Siberian Fed Univ, Khakass Tech Inst, Abakan 655017, Khakasia, Russia)
  • Shibaeva Galina (Siberian Fed Univ, Khakass Tech Inst, Abakan 655017, Khakasia, Russia)
  • Portnyagin Denis (Siberian Fed Univ, Khakass Tech Inst, Abakan 655017, Khakasia, Russia)
  • Ibe Katerina (Siberian Fed Univ, Khakass Tech Inst, Abakan 655017, Khakasia, Russia)