Selection of Positioning Devices for the Components of CNC Machines

Описание

Тип публикации: статья из журнала

Год издания: 2021

Идентификатор DOI: 10.3103/S1068798X21110204

Ключевые слова: cnc machines, discreteness, error, monitoring device, motion, positional accuracy, working components

Аннотация: Abstract: The quality of CNC machines and their control systems is assessed in terms of the contour accuracy, consisting of two components: the accuracy in sending the signal confirming that the working component has reached the specified coordinate; and the accuracy in executing the stop command, given the inertia of the actuatorsПоказать полностью. Recommendations are made regarding the selection of the device for monitoring the motion of the working components in a CNC machine with a gapless gear transmission and a torsional motor. If the required positional accuracy is low, it is acceptable to disregard the error in the gear ratio of the mechanical transmission between the sensor and the guide screw (or any other device converting rotation into linear motion). When using a device for monitoring the motion of the working components in a CNC machine, the adjustment of the sensor at the center of the scale interval should be as precise as possible. © 2021, Allerton Press, Inc.

Ссылки на полный текст

Издание

Журнал: Russian Engineering Research

Выпуск журнала: Vol. 41, Is. 11

Номера страниц: 1067-1070

ISSN журнала: 1068798X

Издатель: Pleiades journals

Персоны

  • Liberman Y.L. (Yeltsin Ural Federal University, Yekaterinburg, Russian Federation)
  • Gorbunova L.N. (Siberian Federal University, Krasnoyarsk, Russian Federation)

Вхождение в базы данных