ESTIMATION OF CLAY ROCK BREAKAGE BY A TWO-PHASE WATER JET FLOW

Описание

Тип публикации: статья из журнала

Год издания: 2020

Ключевые слова: breaking performance, clay body, deposit, ejection, hard abrasive particles, hydraulic breaking, hydraulic monitor, jet impact force on the mine face, modeling

Аннотация: It is considered to be the most effective to use water jetting for placer deposits, composed of clay wall rock. To increase its production, various constructive and technological methods are possible to apply. For the breaking performance increasing, the use of a special device has been proposed, which ensures the ejection of solidПоказать полностьюabrasive particles into the hydro monitor barrel. The use of this device allows increasing the performance of the hydraulic breaking of the mined rock mass by 4.8-7.4 times. The use of the technology is most effective when applying a mining method with minor or side mine face at an angle of about 35° between the mine face and the jetting axis, but does not exclude the use of other mining methods. © 2020. Asian Research Publishing Network (ARPN). All Rights Reserved.

Ссылки на полный текст

Издание

Журнал: ARPN Journal of Engineering and Applied Sciences

Выпуск журнала: Vol. 15, Is. 20

Номера страниц: 2258-2265

ISSN журнала: 18196608

Издатель: Asian Research Publishing Network

Персоны

  • Shkaruba N. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Kislyakov V. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Shubkina O. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Kirsanov A. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Katyshev P. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Janzen G. (Beckhoff Automation, Verl, Germany)

Вхождение в базы данных