Перевод названия: Principle of constructing an airborne radar sensor for detecting fast-moving targets
Тип публикации: статья из журнала
Год издания: 2019
Идентификатор DOI: 10.18127/j20700784-201912-03
Ключевые слова: радиолокационный датчик, гомодин, автодин, частотная модуляция, radar sensor, homodyne, autodyne, frequency modulation
Аннотация: Постановка проблемы. При решении проблемы обнаружения быстродвижущихся целей (например, баллистических) бортовыми радиолокационными датчиками возможны несколько вариантов технических решений, обеспечивающих одновременно несложную реализацию приемопередающего тракта и повышенную устойчивость к воздействию помех. Цель. Привести краткПоказать полностьюое описание бортовых радиолокационных датчиков (БРД) с радиоимпульсным излучением, обеспечивающего возможности применения одного из двух методов первичной обработки сигналов за счет гибкости программной перестройки его структуры и контроль наличия в эфире радиопомех. Результаты. Приведено описание принципа действия бортового радиолокационного датчика для обнаружения быстродвижущихся целей с интроимпульсным методом выделения сигнала при использовании быстрой внутриимпульсной частотной модуляции (ЧМ) излучения и без ЧМ. Рассмотрены варианты выполнения датчика с гомодинным и автодинным построением приемопередатчика. Практическая значимость. Интроимпульсный режим работы БРД обеспечивает не только повышение его помехоустойчивости по отношению к отраженным сигналам от пассивных помех, но и расширение функциональных возможностей - контроль наличия активных помех в период между моментами активной работы БРД. Правильный выбор параметров зоны селекции по дальности позволяет решать задачу обнаружения цели в условиях ее нахождения на малых высотах. When solving the problem of detecting fast-moving targets (for example, such as ballistic) by airborne radar sensors (BRD), several technical solutions are possible that provide both a simple implementation of the transceiver path and increased immunity to interference [1-3]. This article gives a brief description of radio-frequency pulsed radio frequency radiation, which makes it possible to use one of the two methods of primary signal processing due to the flexibility of software restructuring its structure and simultaneously monitor the presence of radio interference on the air. The first method provides Doppler target selection, and the second - time-frequency target selection due to «fast» in-pulse modulation of the radiation frequency. Both methods are based on the use of intro-pulse signal extraction, which is carried out during the formation and emission of the probe radio pulse. It follows from the results of the analysis of these methods that intro-pulse BRDs can be used in systems with the adaptive principle of forming the response region, in which it is possible to flexibly take into account the conditions of the carrier meeting with the target and its parameters. In addition, the intropulse mode of operation of the BRD provides not only an increase in its noise immunity with respect to reflected signals from passive interference, but also an extension of the functionality - control of the presence of active interference between the moments of active operation of the BRD. The correct choice of the parameters of the selection zone by range will allow us to solve the problem of detecting a target in conditions of its location at low altitudes. It was noted that the described signal processing methods are implemented in the structure both with the homodyne construction of the transceiver and its autodyne construction, when the functions of the transmitter and receiver are combined in one cascade - an oscillator (autodyne) [3-5].
Журнал: Успехи современной радиоэлектроники
Выпуск журнала: № 12
Номера страниц: 16-22
ISSN журнала: 20700784
Место издания: Москва
Издатель: Общество с ограниченной ответственностью "Издательство "Радиотехника"