To calculate the axial dimensions of inkjet devices for hydraulic transport of sand and gravel materials

Описание

Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций

Конференция: International Scientific Conference on Applied Physics, Information Technologies and Engineering, APITECH-III 2021

Год издания: 2021

Идентификатор DOI: 10.1088/1742-6596/2094/2/022032

Аннотация: The article presents the results of the dredger in a deep deposit of sand and gravel materials. It was found that when the diameter of the suction pipe exceeds the diameter of the inlet mixing chamber by 150 mm, the actual pressure from the ejector does not exceed one meter, and with an increase in the supply of the suction pump asПоказать полностьюa result of a sharp jump in hydraulic resistance, the vacuum is disrupted. It was also found that the effect on the calculated compression ratio of the jet apparatus increases with an increase in the injection coefficient and the input velocity of the injected stream. © 2021 Institute of Physics Publishing. All rights reserved.

Ссылки на полный текст

Издание

Журнал: Journal of Physics: Conference Series

Выпуск журнала: Vol. 2094, Is. 2

Номера страниц: 22032

ISSN журнала: 17426588

Издатель: IOP Publishing Ltd

Персоны

  • Medved N.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Egorova E.L. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Morozov V.N. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Gron V.A. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Galaiko A.V. (Siberian Federal University, Krasnoyarsk, Russian Federation)

Вхождение в базы данных