1. Главная
  2. Публикации
  3. Determination Of Functional Dependences Of Technological Modes And Parameters In Induction Surface

Determination Of Functional Dependences Of Technological Modes And Parameters In Induction Surface

Описание

Тип публикации: статья из журнала

Год издания: 2021

Ключевые слова: composite material, functional dependence wear resistance, induction surfacing, regression analysis

Аннотация: One Of The Practical Ways To Increase The Wear Resistance Of Products Operating Under Various Wear Conditions: Shock, Shock-Abrasive And Abrasive - Is The Surfacing Of The Working Parts That Are Most Susceptible To This Effect. The Use Of Induction Surfacing With The Use Of Modern Transistor Generators Makes It Possible To Form A GПоказать полностьюiven Set Of Properties Of The Resulting Composite Material, Which Allows To Significantly Increase The Resource Of The Product And, As A Result, To Increase The Technical And Economic Indicators. High-Energy Impact Makes It Possible To Control The Rates Of Heating And Cooling, Which Leads To The Creation Of Maximum Non-Equilibrium Structures, Which, Under Certain Conditions, Can Provide The Required Complex Of Physical, Mechanical And Operational Properties. The Control Of The Structure Formation Of Materials Of A Given Composition, Under Conditions Far From Thermodynamic Equilibrium, Makes It Possible To Provide The Required Durability Of The Working Zone Of The Product, Taking Into Account The Nature Of Wear. The Purpose Of This Work Is To Establish Functional Dependencies Of Technological Modes And Parameters For Induction Surfacing. In The Course Of The Experimental Studies, Data Were Obtained Characterizing The Relationship Between The Following Parameters - The Deposition Rate, The Deposited Layer Thickness, The Magnitude Of The Increase In Wear Resistance And The Hardness Of The Material. The Obtained Functional Dependencies Between These Parameters Made It Possible To Determine The Required Deposition Rate And The Thickness Of The Deposited Layer Ensuring The Formation Of A Given Set Of Physical And Mechanical Properties Of The Composite Material, Taking Into Account The Nature, Which Is Of High Practical Importance © 2006-2021 Asian Research Publishing Network (Arpn). All Rights Reserved

Ссылки на полный текст

Издание

Журнал: ARPN Journal of Engineering and Applied Sciences

Выпуск журнала: Vol. 16, Is. 18

Номера страниц: 1915-1919

ISSN журнала: 18196608

Издатель: Asian Research Publishing Network

Персоны

  • Masanskii O.A. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Tokmin A.М. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Pochekutov S.I. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Kazakov V.S. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Larionova N.V. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Lytkina S.I. (Department of Materials Science and Materials Processing Technologies, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Khudonogov S.A. (Department of Applied Mechanics, Polytechnic Institute, Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Stankeev V.V. (Department Of Innovative Shipbuilding And Shelf Development Technology, Sevastopol State University, Sevastopol, Russian Federation)
  • Marchenkova S.G. (Department of Technology and Organization of Catering, Institute for Trade and Services, Krasnoyarsk, Russian Federation)

Вхождение в базы данных