Тип публикации: доклад, тезисы доклада, статья из сборника материалов конференций
Конференция: International Scientific Conference on Applied Physics, Information Technologies and Engineering (APITECH) / 2-nd International Scientific and Practical Conference on Borisov's Readings; Siberian Fed Univ, Polytechn Inst, Krasnoyarsk, RUSSIA; Siberian Fed Univ, Polytechn Inst, Krasnoyarsk, RUSSIA
Год издания: 2019
Идентификатор DOI: 10.1088/1742-6596/1399/4/044075
Аннотация: This work demonstrates that the molding technique for polymer-based flexible microwave electronics with various polymers in order to evaluate acceptable boundaries for conductivity and tan loss. Performance evaluation has been done on the microstrip line and patch antennas with and without material improvements. We have demonstrateПоказать полностьюd that improvements in conductivity after 106 S/m do not give significant benefits. The attenuation in microstrip lines has been reduced from 0.16dB/cm to 0.05dB/cm. However, reduction in the tan loss is able to boost antenna gain from 4.2dBi to 6.5dBi. © Published under licence by IOP Publishing Ltd.
Журнал: Journal of Physics: Conference Series
Выпуск журнала: Vol. 1399, Is. 4
Номера страниц: 44075
ISSN журнала: 17426588
Издатель: Institute of Physics Publishing