Exhaust gases purification of sintering furnaces using under-sludge water as a gas cleaning solution [ОЧИСТКАОТХОДЯЩИХГАЗОВПЕЧЕЙСПЕКАНИЯ С ИСПОЛЬЗОВАНИЕМПОДШЛАМОВОЙВОДЫ ВКАЧЕСТВЕГАЗООЧИСТНОГОРАСТВОРА]


Тип публикации: статья из журнала

Год издания: 2020

Идентификатор DOI: 10.18412/1816-0395-2020-3-4-9

Ключевые слова: Alumina production from nepheline, Dust removal efficiency, Foam scrubber, Gas cleaning scheme, Sintering furnace, Under-sludge water #11:

Аннотация: It is proposed to introduce an additional stage of "wet" cleaning of waste gases of caking at RUSAL Achinsk. For experimental industrial research, the work used a multi-vortex scrubber, in which the gas is cleaned in a dispersed water-air layer, formed by the flow of gases from the bottom up through the dispersing lattice. As an abПоказать полностьюsorbent irrigation solution, it is proposed to use pre-heated up to 50 degrees Celsius water (PSH), containing an average of 8.98 g/dm3 and 16.74 g/dm3 of caustic and total alkaline, respectively. The efficiency of gas dust-cleaning was assessed depending on the consumption of PSH (0.2-1.2 l/m3 of gas at feed speeds of 0.2 hp and 0.4 hp), as well as the use of two schemes of its supply (flow and recycling). © 2020 Izdatel'stvo Kalvis. All rights reserved.

Ссылки на полный текст


Журнал: Ecology and Industry of Russia

Выпуск журнала: Vol. 24, Is. 3

Номера страниц: 4-9

Издатель: Izdatel'stvo Kalvis


Вхождение в базы данных

  • Scopus