Improving the efficiency of electric cutting of metal by use of the control system

Описание

Тип публикации: статья из журнала

Год издания: 2019

Идентификатор DOI: 10.17580/tsm.2019.09.11

Ключевые слова: Control algorithm, Electrocontact cutting, Electrode-tool, Metal cutting automation, Specific energy consumption, Technological indicators, Temperature control

Аннотация: In this paper, the possibility of automatic control of the parameters of the installation of electrocontact cutting is considered by matching the supply of the disk electrode-tool with the electrical cutting modes while maintaining a constant temperature in the cut zone corresponding to the temperature of the beginning of recrystalПоказать полностьюlization of the workpiece material. The introduction of an automatic process control system for electrocontact cutting into the overall production system will significantly reduce the material, energy and labor costs of the process, increase the competitiveness of enterprise products by reducing the consumption of materials, energy and improving the quality of blanks. Criteria for evaluating the efficiency of the electrocontact cutting process are considered, the specific energy consumption is determined by the main one. Reducing the energy consumption can be achieved by improving the control actions, primarily on the supply of the electrode tool, by adjusting the electrical modes. To visualize the arrangement of sensors and mechanisms, a 3D model of a stationary installation of electrocontact cutting was built. An algorithm for automatic control of a stationary installation for electrocontact cutting has been developed. The dependence of the supply of the electrode-tool on the technological parameters of cutting and the thermophysical properties of the metal being processed is presented. The proposed technical solutions will allow you to quickly monitor and analyze the process of electrocontact cutting. © 2019, "Ore and Metals" Publishing house. All rights reserved.

Ссылки на полный текст

Издание

Журнал: Tsvetnye Metally

Выпуск журнала: Vol. 2019, Is. 9

Номера страниц: 69-74

ISSN журнала: 03722929

Издатель: "Ore and Metals" Publishing house

Персоны

  • Veretnova T.A. (Siberian Federal University, Krasnoyarsk, Russian Federation)
  • Tsarenko A.A. (Krasinform, Krasnoyarsk, Russian Federation)
  • Veretnov A.G. (Information satellite systems, Zheleznogorsk, Krasnoyarsk Krai, Russian Federation)
  • Shestakov I.Y. (Department of Electronic Engineering and Tele- Communications, Siberian state University of science and technology named after academician M. F. Reshetnev, Krasnoyarsk, Russian Federation)

Вхождение в базы данных